How to Prevent Wood Surfaces With Power Pressure Washers
Indeed, pressure washing Cypress is becoming basic household cleaning tools due to their versatility. Most electric pressure washers can be used to clean indoors and outdoors, hence have become the preferred home cleaning choose compared to their gas and diesel-powered counterparts. While the power pressure washers are competent cleaners for all types of grime, dust and dirt, they can also cause damage to certain materials like wood based surfaces. This is because wood fibers are comparatively more porous than other types of materials and are hence susceptible to damage by the pressure washing process. Therefore, if you have wooden fences and deck furniture at home that need cleaning, you will need to know how to clean them with extra care just so that you do not damage them in the process.
There are two key areas you need to know before you start your cleaning process, that is, the types of wood surfaces you are cleaning and your power pressure washer.
Power pressure washers are categorized by PSI, which means pounds of pressure per square inches or otherwise known as water pressure. The other measurement is G.P.M. or gallons of water per minute, measuring the rate of water flow. And obviously, the higher both indicators are, the more powerful is the machine. And a narrower nozzle will give you more focused spot cleaning which may not be a good cleaning approach in certain cases.
There are a wide variety of wood based fences and deck furniture and different types required different pressure so as to cause a little damage as possible. There pressure-treated pine, larch, cedar, the more precious redwood or TX - Cypress, all of which probably require different cleaning treatments when pressure washing.
There are hard and treated wood like the pressure treated pine wood, with contrasting weak wood fibers like cedar wood materials. The former is capable of withstanding strong water pressure and they are considerably safe from damage. Using a 1,500 PSI and 3 G.P.M. and a tighter angle nozzle would do the job. The latter however, have more porous wood fibers and they are much softer materials which could damage easily with a tight nozzle, intense water pressure or a sudden onslaught of water flow. Hence, when starting to clean your cedar wood deck furniture use the same machine specifications but with a wider fan angle of about 45 to 60 degree and stand at ta further distance the cedar wood material. Test the process to find the right distance slowly so as not to damage the surface.
TX power washing is very versatile home cleaning tools but they are only good when used the right way and often it takes caution and care to find the right cleaning approach. It is all about knowing well your machine and the surfaces to be cleaned.Article Source: http://EzineArticles.com/5188727
